2009 Ford Taurus X Scheduled Maintenance Guide 2nd Printing - Page 24
2009 Ford Taurus X Manual
Page 24 highlights
NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 105,000 miles Change engine oil and replace oil filter Change manual transmission fluid (except Escape) Replace cabin air filter (if equipped) Replace PCV valve on all light trucks under 6,000 lbs. Gross Vehicle Weight (GVW) (except 3V engines) Change rear axle fluid only on vehicles equipped with DANA axles (see Special Operating Conditions on page 42 and Exceptions on page 48) Change Motorcraft Premium Gold Engine Coolant (see Exceptions on page 48 and Premium Gold Coolant Change Record on page 49) Inspect steering linkage, ball joints, suspension, tie rod ends, driveshaft, and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Inspect and lubricate 4x4 front axle U-joints Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 112,500 miles ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure ❑ ❑ tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 24 Scheduled Maintenance 2009 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)