2010 Ford F250 Super Duty Super Cab Scheduled Maintenance Guide 2nd Printing - Page 24
2010 Ford F250 Super Duty Super Cab Manual
Page 24 highlights
NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 120,000 miles ❑ Change engine oil and replace oil filter ❑ Replace cabin air filter (if equipped) ❑ Replace climate-controlled seat filters (if equipped) ❑ Replace engine air filter ❑ Replace fuel filter (except Escape, Mariner, F-Series [non Super Duty], Expedition/Navigator [short wheel base only], E-Series and Transit Connect) Change automatic transmission fluid and filter on all vehicles equipped with the TorqShift transmission. Consult your dealer for your particular requirements. Replace wheel bearing grease and grease seals on 4x2 front wheel bearings (if non-sealed bearings) Inspect steering linkage, ball joints, suspension, tie rod ends, driveshaft, and U-joints (lubricate if equipped with Zerk fittings) Torque the rear U-bolts Transit Connect only) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect accessory drive belts Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Inspect and lubricate 4x4 front axle U-joints Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) ❑ DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 24 Scheduled Maintenance 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)