2010 Ford Ranger Super Cab Scheduled Maintenance Guide 2nd Printing - Page 45
2010 Ford Ranger Super Cab Manual
Page 45 highlights
SPECIAL OPERATING CONDITIONS Off-road operation Inspect frequently, service as - Replace cabin air filter (if equipped). required - Inspect and lubricate steering linkage ball joints and U-joints (if equipped with grease fittings). Every 5,000 miles or 6 months - Change engine oil and replace oil filter. - Rotate tires, inspect tires for wear and measure tread depth. - Inspect the wheels and related components for abnormal noise, wear, looseness or drag. Every 30,000 miles - Change automatic transmission fluid (not required on 6R60/6R80/TorqShiftா transmissions). - Replace wheel bearing grease and grease seals on 4x2 front wheel bearings (if non-sealed bearings are used). Every 50,000 miles - Change manual transmission fluid. - Change rear axle lubricant (E-450 and F-450/550 only). Every 60,000 miles - Change transfer case fluid. Use of E85 50% of the time or greater (flex fuel vehicles only) Every 5,000 miles - Rotate tires, inspect tires for wear and measure tread depth. - Inspect the wheels and related components for abnormal noise, wear, looseness or drag. Every 3,000 miles - If ran exclusively on E85, fill the tank full with regular unleaded fuel. Every 5,000 miles or 6 months - Change engine oil and replace oil filter. Special Operating Conditions & Exceptions Scheduled Maintenance 45 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)