2011 Ford F450 Super Duty Crew Cab Owner Guide 4th Printing - Page 388
2011 Ford F450 Super Duty Crew Cab Manual
Page 388 highlights
Maintenance and Specifications Do not add aftermarket fuel additive products to your fuel tank. It should not be necessary to add any aftermarket products to your fuel tank if you continue to use high quality fuel of the recommended octane rating. These products have not been approved for your engine and could cause damage to the fuel system. Repairs to correct the effects of using an aftermarket product in your fuel may not be covered by your warranty. Many of the world's automakers approved the World-Wide Fuel Charter that recommends gasoline specifications to provide improved performance and emission control system protection for your vehicle. Gasolines that meet the World-Wide Fuel Charter should be used when available. Ask your fuel supplier about gasolines that meet the World-Wide Fuel Charter. Diesel engine (if equipped) Refer to the diesel supplement for information regarding diesel fuel recommendations and requirements of your diesel-powered truck. Cleaner air Ford endorses the use of reformulated "cleaner-burning" gasolines to improve air quality, per the recommendations in the Choosing the right fuel section. Running out of fuel Avoid running out of fuel because this situation may have an adverse effect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from off to on several times after refueling to allow the fuel system to pump the fuel from the tank to the engine. On restarting, cranking time will take a few seconds longer than normal. • Normally, adding 1 gallon (3.8L) of fuel is enough to restart the engine. If the vehicle is out of fuel and on a steep grade, more than 1 gallon (3.8L) may be required. indicator may come on. For more • The service engine soon information on the service engine soon indicator, refer to Warning lights and chimes in the Instrument Cluster chapter. 388 2011 F-250/350/450/550 (f23) Owners Guide, 4th Printing USA (fus)