2011 Ford Mustang Shelby GT500 Supplement 1st Printing - Page 31

Item Transmission fluid3 6.35 pints (3.5L)4 Capacity 2011 05+ Mustang (197) Supplement, 1st Printing USA (fus) Windshield washer fluid 4.0 quarts (3.8L) Ford part name or Ford part number / equivalent Ford Specification Motorcraft XT-5-QM / MERCON௡ V ATF MERCON௡ V Motorcraft Premium Windshield Washer ZC-32-A (US) Concentrate (US) / CXC-37-(A, B, D, and F) Premium Quality (Canada) / Windshield Washer Fluid WSB-M8B16-A2 / - (Canada) 1 Add the coolant type originally equipped in your vehicle. Rear axle lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. For vehicles with a cooler, the axle pump must be running to perform the service refill. Fill 1/4-9/16 in. (6-14 mm) below bottom of fill hole. 3 The TREMEC 6060 6-speed manual transmission on your Shelby GT500 uses MERCON௡ V automatic transmission fluid. Make sure that the correct MERCON௡ V ATF automatic transmission fluid is used as indicated on the label on your transmission. 4 Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. For vehicles with a transmission cooler, the engine must be running, the clutch pedal must be released, and the transmission must be in neutral to perform the service refill. 2 Maintenance 31