2013 Ford Explorer Owner Manual Printing 4 - Page 402

Wheels and Tires 401 8. Remove the jack and fully tighten the lug nuts in the order shown. See Wheel Lug Nut Torque Specifications later in this chapter for the proper lug nut torque specification. Stowing the mini-spare and jack 1. Replace the wheel chock in the foam tray. 2. Adjust the jack to the proper height to install the wrench. Turn the jack lead screw until the arrow on the upper link is slightly below the circle indicator shown on the lower link. A B Push the button (A) to retract the wrench handle and place the wrench over the raised tab on the lower link and drop the tang (B) through the hole in the diagonally opposite upper link. Turn the lead screw of the jack clockwise until the arrow aligns with the circle indicator to secure the wrench onto the jack. 3. Place the jack in the foam tray and secure it with the attached strap. 4. Place the foam tray over the mounting bracket on the floor of the spare tire well. 5. Replace the mini-spare over the jack and secure with the wing nut. 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012 USA (fus)