2013 Ford F150 Regular Cab Owner Manual Printing 3 - Page 248

Parking Aids Manual Zoom 247 WARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse). Note: When manual zoom is enabled, only the centerline is shown. Allows the driver to get a closer view of an object behind the vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in R (Reverse). When the transmission is shifted out of R (Reverse), the feature automatically turns off and must be reset when it is used again. Touch screen display (if equipped) Do the following to turn the manual zoom feature on or off: 1. Place the vehicle in R (Reverse). 2. Select Zoom on the touch screen display. 3. You can choose from OFF, Level 1, 2 or 3. The selected level will appear between the buttons (i.e. Level 1). When activating manual zoom mode, the system always starts from OFF. Rearview mirror display (if equipped) To turn the manual zoom feature on or off see the Information Displays chapter. Rear Camera Delay When shifting the transmission out of R (Reverse) and into any gear other than P (Park), the camera image remains in the display until the vehicle speed reaches 6 mph (10 km/h). This occurs when the rear camera delay feature is on, or until a radio button is selected. Selectable settings for this feature are ON and OFF. The default setting for the rear camera delay is OFF. 2013 F-150 (f12) Owners Guide gf, 3rd Printing, February 2013 USA (fus)