2013 Ford Focus Owner Manual Printing 3 - Page 42

Safety Belts 41 3. For the seating position being disabled, buckle then unbuckle the safety belt four times at a moderate speed, ending in the unbuckled state. • After Step 3, the safety belt warning light will turn on. 4. While the safety belt warning light is on, buckle and then unbuckle the safety belt. • After Step 4, the safety belt warning light will flash three times for confirmation. • This will disable the Belt-Minder feature for that seating position if it is currently enabled. • This will enable the Belt-Minder® feature for that seating position if it is currently disabled. CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child seat safety belts to make sure there are no nicks, tears or cuts. Replace if necessary. All vehicle safety belt assemblies, including retractors, buckles, front safety belt buckle assemblies, buckle support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seat back (if equipped), child safety seat LATCH and tether anchors, and attaching hardware, should be inspected after a crash. Read the child restraint manufacturer's instructions for additional inspection and maintenance information specific to the child restraint. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Safety belt assemblies not in use during a crash should also be inspected and replaced if either damage or improper operation is noted. For proper care of soiled safety belts, see Cleaning the Interior in the Vehicle Care chapter. 2013 Focus (foc) Owners Guide gf, 3rd Printing, November 2012 USA (fus)