2013 Ford Focus Quick Reference Guide Printing 2 - Page 8

FUNC T I O N Rear View Camera* Provides a video image of the area behind the vehicle in either the rearview mirror or the display in the center of the instrument panel. The image automatically appears when the vehicle is in R (Reverse) and uses green, yellow and red guides to alert you of your proximity to objects. 2 0 1 3 f o c u s C O MF O R T Tilting Head Restraints Your vehicle's front-row head restraints can be adjusted. To raise: Pull up on the head restraint. To lower: Press the head restraint down while pressing and holding the guide sleeve adjust/release button. To tilt the head restraint: Gently pull the top of the head restraint forward. To return it to its upright position: Tilt it forward once more and release. Note: Do not attempt to force the headrest backward after it is tilted. Instead, continue tilting it forward until the headrest releases to the upright position. 2 0 1 3 f o c u s Forward and Reverse Sensing Systems* Sounds an audible warning tone if there is an obstacle near the vehicle's front or rear bumpers. •  As the vehicle moves closer to the obstacle, the rate of the warning tone increases in frequency. •  The front sensors are automatically activated when the vehicle is in D (Drive) and will detect objects up to 27 inches (70 centimeters) away. •  The reverse sensors are activated automatically when the vehicle is in R (Reverse), and will detect objects up to 6 feet (2 meters) away. •  See the Parking Aids chapter in your Owner's Manual for complete information on your vehicle's sensing systems. Note: Visibility aids do not replace the need to watch where the vehicle is moving. Refer to your Owner's Manual for safety information, more detail and limitations. PowerShift Automatic Transmission* Designed for fun-todrive performance and outstanding fuel economy, this transmission will sound and feel differently than what you may be used to. See the Transmission chapter of your Owner's Manual for more details. Front-Seat Adjusters Height/Recline Adjustment Lift the control to adjust the height of the seat. Lift the control to adjust the angle of the seat back. Height Adjustment Control Seat back Recline Control Integrated Blind Spot Mirrors Designed to assist you by increasing the visibility along the side of your vehicle. •  The integrated convex mirror is built into the upper outboard corner of the exterior mirrors. •  As an approaching vehicle moves toward you, you will see its reflection first in the main mirror, and then in the blind spot mirror. 14 SelectShift® Automatic Transmission* Gives you the ability to manually change gears if you'd like. To use: •  Move the gearshift lever from D (Drive) to S (Sport). •  Activate SelectShift by using the + / - thumb toggle located on the side of your gearshift lever to manually make shifts. •  Press the (+) button to upshift. Press the (-) button to downshift. *if equipped Dual Climate Controls* With the dual climate controls, you have the flexibility to operate the temperature with one control, called mono mode, or two, where both driver and front passenger can select independent temperatures using their own rotary dials. To operate the dual temperature control: Use the rotary control on the passenger's side. Mono mode automatically shuts off. To return back to mono mode: Press and hold the AUTO button. The passenger's side temperature automatically adjusts to the driver's side temperature setting, and both sides will then remain linked to the driver's control. 15 Heated front Seats* The heated front seat controls are located on the center console near the gearshift lever. To use, simply: • Adjust the dial to the desired heat setting. • Choose from 0 - 5 (off-high). *if equipped