2014 Ford Expedition Owner Manual Printing 1 - Page 108
2014 Ford Expedition Manual
Page 108 highlights
Information Displays 107 • MILES (km) TO E: This displays an estimate of approximately how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition off when refueling to allow this feature to correctly detect the added fuel. Distance to empty is calculated using a running average fuel economy, which is based on your recent driving history of 500 miles (800 km). This value is not the same as the average fuel economy display. The running average fuel economy is re-initialized to a factory default value if the battery is disconnected. • AVG MPG (L/100km): Average fuel economy displays your average fuel economy in miles/gallon or liters/100 km. • XX°F / XX°C: The outside air temperature is shown together with the compass heading in the bottom row of the message center display. Refer to Units in this section for information on selecting °F or °C. • COMPASS DISPLAY (if equipped): Displays the vehicle's heading direction. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy. If the compass appears to be inaccurate, a manual calibration may be necessary. Refer to Compass zone adjustment Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic 3 2 1 15 location by referring to the zone map. 2. Press and release the 4 14 SELECT/RESET stem to scroll 13 through the information displays 5 12 until the message center displays HOLD RESET FOR SETUP MENU. 6 7 8 9 1011 3. Press and hold the SELECT/RESET stem to get into the setup menu. Repeatedly press it again to scroll through the setup menu until the message center displays COMPASS ZONE XX. 4. Press and hold the SELECT/RESET stem for approximately two seconds to go to the next zone, then release. 5. Press and hold to go up by one zone then release. Repeat this until you reach the desired zone. 6. Release the SELECT/RESET stem and allow the setup timer to expire to exit the procedure 2014 Expedition (exd) Owners Guide gf, 1st Printing, June 2013 USA (fus)