2014 Ford F350 Super Duty Regular Cab Diesel Supplement Printing 1 - Page 51
2014 Ford F350 Super Duty Regular Cab Manual
Page 51 highlights
Maintenance coolant concentration (freeze point protection) and corrosion inhibitor additive level (strength) of the coolant for maximum engine performance and protection. Three products are available to confirm the life and health of the coolant: one tool, a test kit and a coolant inhibitor additive: • Rotunda tool 300-ROB75240 available from your dealer - recommended refractometer to test coolant concentration. Rotunda 328-R071-ELC (Antifreeze Coolant ELC Contamination Kit) - Evaluates the corrosion inhibitor additive strength. Note the first step is to verify the vehicle's coolant concentration is in the correct range of 40 - 60%. Coolant concentrations outside this range will not provide valid test results. If the report results in a pass (i.e., the cooling system does not show excessive contamination/the corrosion inhibitor additive strength is sufficient), no action is required. If the report results as insufficient (does not pass), the corrosion inhibitor additive strength of the coolant is too low. If the ENGINE COOLING SYSTEM corrosion inhibitor additive strength is low, add 48 fluid oz. of Motorcraft Specialty Orange Engine Coolant Revitalizer. If the SECONDARY COOLING SYSTEM corrosion inhibitor additive strength is low, add 16 fluid oz. of Motorcraft Specialty Orange Engine Coolant Revitalizer. Motorcraft Specialty Orange Engine Coolant Revitalizer - Additive to boost the corrosion inhibitor level based upon the test results of the Antifreeze Coolant ELC Contamination Kit. The Revitalizer may be added two times over the life of the coolant. If additional dosages are required, the cooling system must be flushed and refilled per the instructions in the Workshop Manual. • • See Capacities and Specifications (page 54). for the proper coolant and additive specifications. 48 Super Duty (TFA)