2014 Ford F350 Super Duty Regular Cab Owner Manual Printing 2 - Page 150
2014 Ford F350 Super Duty Regular Cab Manual
Page 150 highlights
Transmission WARNINGS When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure. Use wheel chocks if appropriate. If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer. Your vehicle is equipped with a brake-shift interlock feature that prevents the gearshift lever from being moved from P (Park) when the ignition is in the 3 (on) position and the brake pedal is not pressed. If you cannot move the gearshift lever out of P (Park) position with the ignition in the 4 (on) position and the brake pedal pressed, a malfunction may have occurred. It is possible that a fuse has blown or the vehicle's brake lamps are not operating properly. See Fuse Specification Chart (page 215). If the fuse is not blown and the brake lamps are working properly, the following procedure will allow you to move the gearshift lever from P (Park): 1. Apply the parking brake. Turn the ignition key to 1 (off), then remove the key. 2. Move the steering column to the full down and full rearward position (toward the driver 's seat). 3. Remove the gearshift lever boot. 4. Place fingers into hole where the gearshift lever boot was removed from and pull top half of shroud up and forward to separate it from the lower half of the shroud. There is a hinge at the forward edge of the top shroud. Roll the top half of the shroud upward on the hinge point to clear the hazard flasher button, then pull straight rearward toward the driver 's seat to remove. 5. Remove the top half of the shroud. 6. Remove the three fasteners under the column that secure the lower shroud half to the column. E163185 7. Pull the lock lever into the full unlocked position and remove the lower shroud cover by pulling the lever handle through the slot in the cover. E163186 8. Apply the brake and move the gearshift lever into N (Neutral). 147 Super Duty (TFA)