2014 Ford F350 Super Duty Super Cab Owner Manual Printing 2 - Page 290
2014 Ford F350 Super Duty Super Cab Manual
Page 290 highlights
Wheels and Tires Jacking the Vehicle 8. Stow the jack, jack handle and lug wrench. Make sure the jack is securely fastened so it does not rattle when driving. 9. Unblock the wheels. 1 6 7 4 E162819 3 1. Insert the jack handle into the pump linkage. 2. Use an up-and-down motion with the jack handle to raise the wheel completely off the ground. Note: Hydraulic jacks are equipped with a pressure release valve that prevents lifting loads which exceed the jack's rated capacity. 3. Remove the lug nuts with the lug wrench. 4. Replace the flat tire with the spare tire, making sure the valve stem is facing outward on all front an inboard rear wheels. If you are replacing the outboard wheel, the valve stem must be facing inward. Reinstall the lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. 5. Lower the wheel by slowly turning the release valve counterclockwise. Opening the release valve slowly will provide a more controlled rate of descent. 6. Remove the jack and fully tighten the lug nuts in the order shown. See Technical Specifications (page 290). 7. Stow the flat tire. See Stowing the flat or spare tire if the vehicle is equipped with a spare tire carrier. 8 E161441 5 2 8-lug nut torque sequence 10 3 5 7 E169375 1 8 6 4 2 9 10-lug nut torque sequence Installing Dual Rear Wheel Ornaments A E162822 B 287 Super Duty (TFA)