2014 Ford Fusion Quick Reference Guide Printing 1 - Page 8

function Rear View Camera* Provides a visual display of the area behind the vehicle. The display automatically appears in the touchscreen when the vehicle is in R (Reverse) and uses green, yellow and red guides to alert you of your proximity to objects. comfort Driver Alert* Monitors your driving behavior and determines when your alertness is reduced or insufficient. When driving ability is determined to be at risk, a chime will sound and a message appears in the information display screen. If no correction is made, warnings will continue to alert the driver. Press OK on the steering wheel to clear the warning. Heated Front Seats* To access, press the Climate corner on the touchscreen. For heated repeatedly to cycle through the various heat front seats, press modes and off. If your vehicle is not equipped with a touchscreen, use the hard button controls (indicated by the same symbol) to cycle through the various heat modes and off. Tilting Head Restraints Your vehicle's front head restraints have a tilting feature for extra comfort. To Tilt the Head Restraint Adjust the seatback to an upright driving or riding position. Pivot the head restraint forward toward your head to the desired position. Once it is in the forward-most position, tilting it forward once more will release it to the upright position. Note Do not attempt to force the head restraint backward after it's tilted. Instead, continue tilting it forward until the head restraint releases to the upright position. Front and Rear Sensing System* Sounds a warning tone if there is an obstacle near the vehicle's rear bumper when the vehicle is in R (Reverse) and is traveling less than 3 mph (5 km/h). The warning tone will increase in frequency as the object gets closer. Collision Warning System* Designed to alert the driver of certain collision risks, sensors detect if vehicles ahead of you, which are moving in the same direction, may be a collision risk. The system will alert you with an audible chime and a red warning light will appear above the dash. If the risk of collision increases, the system will increase brake support to help reduce collision speed. Memory Function* Use the memory controls located on the driver's door to program and then recall memory positions. Move the seats and mirrors to the desired positions. To program up to three positions, press and hold the desired preset button until you hear a single chime. You can now use these controls to recall the set positions. Lane Keeping System* Prevents unintentional drifting out of your lane through various driver alerts and steering corrections toward the center of the lane. Set your system settings as desired by Mode, Sensitivity and Intensity from your information display screen. SecuriCodeTM Keyless Entry Keypad* Allows you to lock or unlock the doors, recall memory features and arm or disarm the anti-theft alarm. The keypad, located near the driver's window, is invisible until touched and then it lights up so you can see and touch the buttons. To get started, you will need your five-digit factory code found on your owner's wallet card or it can be temporarily displayed on the message center, if the card isn't handy. Entering this code unlocks the driver's door. To lock all of the doors, press and hold 7•8 and 9•0 at the same time. For complete information, refer to the Locks chapter of your Owner's Manual. Note Visibility aids do not replace the need to watch where the vehicle is moving. Refer to your Owner's Manual for safety information, more details and system limitations. *if equipped SelectShift Automatic® Transmission Gives you the ability to manually change gears if you'd like. To use, move the gearshift lever from D (Drive) to S (Sport). If Equipped with the Toggle Located on the Gearshift Lever » Press the (+) button to upshift. » Press the (-) button to downshift. If Equipped with the Steering Wheel Paddles Located on Your Steering Wheel » Pull the right paddle (+) to upshift. » Pull the left paddle (-) to downshift. *if equipped Moonroof* Your moonroof controls are located on the overhead console and have a one-touch open and close feature. To open the moonroof, . It will stop short of the fully opened position to press the . To use the venting help reduce wind noise. To close, press the button. feature, press the Open Window Buffeting When only one side window is open, you may hear a pulsing noise. Open both windows on the same side of the vehicle to alleviate this noise. 15