2014 Ford Taurus Owner Manual Printing 1 - Page 75

74 Locks Unlocking and Locking the Doors To unlock the driver door: Enter the factory-set 5-digit code or your personal code. You must press each number within five seconds of each other. The interior lamps will illuminate. Note: All doors will unlock if the two-stage unlocking feature is disabled. Refer to Locking and Unlocking earlier in this chapter. To unlock all doors: Enter the factory-set code or your personal code, then press 3•4 within five seconds. To lock all doors: Press and hold 7•8 and 9•0 at the same time with the driver door closed. You do not need to enter the keypad code first. Displaying the Factory Set Code With Integrated Keyhead Transmitters Note: You will need to have two programmed passive anti-theft keys for this procedure. To display the factory-set code in the information display: 1. Insert a key into the ignition and switch the ignition on for a few seconds. 2. Switch the ignition off and remove the key. 3. Insert the second key into the ignition and switch the ignition on. The factory-set code will display for a few seconds. Note: The code may not display until after any other warning messages first display. With Intelligent Access Keys Note: You will need to have two programmed intelligent access keys for this procedure. To display the factory-set code in the information display: 2014 Taurus Owners Guide gf, 1st Printing, April 2013 USA (fus)