2014 Ford Transit Connect Passenger Owner Manual Printing 1 - Page 125
2014 Ford Transit Connect Passenger Manual
Page 125 highlights
Brakes PARKING BRAKE WARNING Always set the parking brake fully and leave your vehicle with the transmission selector lever in position P. Note: Do not press the release button while pulling the lever up. To apply the parking brake: 1. Press the foot brake pedal firmly. 2. Pull the parking brake lever up to its fullest extent. Note: If you park your vehicle on a hill and facing uphill, move the transmission selector lever to position P and turn the steering wheel away from the curb. Note: If you park your vehicle on a hill and facing downhill, move the transmission selector lever to P and turn the steering wheel toward the curb. To release the parking brake: 1. Press the brake pedal firmly. 2. Pull the lever up slightly. 3. Press the release button and push the lever down. WARNINGS During all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death. The system will turn off if a malfunction is apparent or if you rev the engine excessively. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death. The system makes it easier to pull away when your vehicle is on a slope without the need to use the parking brake. When the system is active, your vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal. This allows time to move your foot from the brake to the accelerator pedal. The brakes are released automatically once the engine has developed sufficient drive to prevent your vehicle from rolling down the slope. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space. The system will turn on automatically on any slope which can result in significant vehicle rollback. HILL START ASSIST (IF EQUIPPED) WARNINGS The system does not replace the parking brake. When you leave your vehicle, always apply the parking brake. Failure to leave your vehicle securely parked may lead to a crash or injury. See Parking Brake (page 122). You must remain in your vehicle once the system activates. Failure to follow this warning could result in serious personal injury or death. Using Hill Start Assist 1. Press the brake pedal to bring your vehicle to a complete standstill. Keep the brake pedal pressed. 2. If the sensors detect that your vehicle is on a slope, the system will activate automatically. 122 Tourneo Connect/Transit Connect (CHC) Canada/United States of America