2015 Ford F150 Regular Cab Owner Manual Printing 1 - Page 61

Keys and Remote Controls 5. Reinstall the housing and cover. Memory Feature (If Equipped) You can use the remote control to recall memory settings for the driver seat, power mirrors, steering column and power foot pedals. Press the unlock button on a linked remote control to recall the memory positions. If you enable the easy-entry-and-exit feature, the seat moves to the easy-entry position. The seat moves to the driver memory position when you put the key in the ignition. Linking a Preset Position to your Remote Control or Intelligent Access Key Fob 1. With the ignition on, move the memory features to the desired positions. E151796 1. Slide the release on the back of the remote control and pivot the cover off. E153890 2. Insert a coin into the slot and twist to separate the housing. E142554 E153891 2. Press and hold the desired preset button for about five seconds. You hear a tone in about two seconds. Continue to hold until you hear a second tone. 3. Within three seconds, press the lock button on the remote control you are linking. Repeat this procedure for another memory button and transmitter if desired. To unlink a remote control, follow the same procedure, but with step three, press the unlock button on the remote. 3. Remove the batteries. 4. Install new batteries with the + facing each other. Note: Make sure to replace the label between the two batteries. 58 F-150 (), enUSA, First Printing