2015 Ford Transit 350 Wagon Owner Manual Printing 3 - Page 277

Capacities and Specifications Only use fluid that meets Ford specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. Use only Motorcraft DOT 4 LV High Performance Brake Fluid, or equivalent, meeting WSS-M6C65-A2 or ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Use multi-purpose grease for door latches, hood latch, auxiliary hood latch, trunk latch and seat tracks. If you use oil and fluids that do not meet the defined specification and viscosity grades this may lead to: • Component damage which may not be covered by the vehicle Warranty. • Longer engine cranking periods. • Increased emission levels. • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. E142732 An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricant Standardization and Approval Committee (ILSAC). Note: Do not use supplemental engine oil additives. They are unnecessary and could lead to engine damage that is not covered by Ford's warranty. CAPACITIES AND SPECIFICATIONS - 3.7L WARNING The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. Capacities Item Capacity Engine lubrication system - including the oil filter Engine lubrication system - excluding the oil filter Engine oil top-up - raise the level on the dipstick from minimum to maximum 6 qt (5.7 L) 5.5 qt (5.2 L) 1 qt (0.9 L) 274 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing