1995 GMC Safari Owner's Manual - Page 243

Front ParklTurn Signal Lamps (Composite and Sealed Beam) 1. Remove the two screws at the inside edge of the parkinghrn signal lamp assembly. 2. Remove the lamp assembly. 3. Squeeze the tab on the sideof the lamp socket while turning the socket counterclockwise. 4. Pull the socket out of the lamp assembly. 5. Pull the bulb from the socket. 6. Gently push the new bulb into the socket. 7. Put the socket back into the lamp assembly and turnit clockwise until it locks. 8. Put the parkinghrn signal lamp assembly back into the vehicle and tighten the screws. 6-37