1995 GMC Yukon Owner's Manual - Page 185

Remote Cassette Player ET@ AM-FM Stereo Audio Compact DiscATC System Compact Disc ATC System that includes a remote cassetteplayer, the cassette player is located in the center of the instrument panel. Your tape player is built to work best with tapes that are 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player. To load a cassette tape with the ignition off, first press EJECT. Then, insert the cassette tape. Once the tape is playing, use the control knobs for volume, balance, fade, treble and bass just as you do for the radio. A lighted tape symbol shows when a cassette tape is in the player. A lighted arrow will also appear and show the direction of play when a tape is active. The player automatically sensesif the cassette tapeis metal or CR02 and adjusts for best playback sound. For metal tapes, 00 (Dolby@Noise Reduction) will appear in the display. Any time a cassettetape is inserted, the top side is selected for play first. PREV (1) - Press PREV or 4 SEEK (in the opposite direction that the lighted tape direction arrowpoints) to search for the previous selection. A minimum three-second blank gap is needed for the player to stop at the beginning of the selection. The tape direction arrow will blink during the SEEK operation and the audio is in the mute mode. PROG (on cassette player) - Press PROG to go from one side the tape of to the other. NEXT (3) - Press NEXT or SEEK (in the direction that the lighted tape direction arrow points) to search for the next selection. A minimum three-second blank gap is needed for the player to stop at the beginning of the selection. NEXT will appear in the display and the audio is in the mute mode. 3-25