1996 GMC Sonoma Owner's Manual - Page 263

Underhood Lamp I . Disconnect the electrical connector from the underhood lamp assembly. 2. Remove the screws. Vanity Mirror Lamps I . Insert the blade of a small screwdriver into the center slot at the bottom of the lens. 2. Gently pry the screwdriver down in order t o lift out the lens. 3. Disconnect the ground wire. 4. Remove the lamp assembly from the hood. 5 . Install the new bulb. 3. Pry out the bulb. 4. Press the new bulb into place. 6. Replace the assembly. Install and tighten the screws. 7. Connect the ground wire. 5 . Slide the side tabs of the lens under the side of the vanity assembly frame. 6. Rotate the lens downward. 8. Connect the electrical connector to the lamp assenlbly. 7. Snap the lens into the frame. 6-41