1997 GMC Safari Owner's Manual - Page 296

6. Remove the composite assembly. Front Turn Signal Lamps 1. Remove the two screws at the inside edge of the parkingkurn signal lamp assembly. 2. Remove the lamp assembly. 3. Squeeze the tab on the side of the lamp socket while turning the socket counterclockwise. 7. Turn the halogen bulb counterclockwise toremove from the assembly. 8. Install the new bulb into the composite assembly by turning it clockwise until it is completely tightened. 9. Replace the composite assembly by installing and tightening all of the screws previously removed. 4. Pull the socket out of the lamp assembly. 5. Pull the bulb from the socket. 6. Gently push the new bulb into the socket. 7. Put the socket back into the lamp assembly and turn it clockwise until it locks. 8. Put the parkingkurn signal lamp assembly back into the vehicle and tighten the screws.