2005 GMC Safari Owner's Manual - Page 262

Front Turn Signal and Parking Lamps 1. Remove the two screws at the inside edge of the parking/turn signal lamp assembly. 2. Remove the lamp assembly. 3. Squeeze the tab on the side of the lamp socket while turning the socket counterclockwise. Taillamps, Turn Signal, Stoplamps and Back-up Lamps 1. Open the rear door. See Rear Doors on page 2-11 for more information. 2. Remove the two screws from behind the door. 4. Pull the socket out of the lamp assembly. 5. Pull the bulb from the socket. 6. Gently push the new bulb into the socket. 7. Put the socket back into the lamp assembly and turn it clockwise until it locks. 8. Put the parking/turn signal lamp assembly back into the vehicle and tighten the screws. 5-54