2006 GMC Canyon Owner's Manual - Page 328

To replace one of these bulbs, do the following: 1. Open the tailgate. See Tailgate on page 2-9 for more information. 2. Remove the two rear lamp assembly screws near the tailgate latch. Replacement Bulbs Exterior Lamp Center High-Mounted Stoplamp (CHMSL) Headlamps Composite High-beam Composite Low-beam/Daytime Running Lamp (DRL)* Sealed-beam Parking/Front Turn Signal/Daytime Running Lamp (DRL)* Parking Lamp (Inboard) Stoplamp, Rear Turn Signal, Taillamp, and Back-up Lamp 9005 9006 H6054 3757KA 3157A 3057 Bulb Number 912 3. Pull out the lamp assembly. 4. Turn the bulb socket counterclockwise to remove it from the taillamp housing. 5. Pull the old bulb straight out from the socket. 6. Press a new bulb into the socket and turn the socket clockwise into the taillamp housing until it is tight. 7. Reinstall the rear lamp assembly and tighten the screws. *Your vehicle may have the DRL function either in the low-beam headlamp or the parking lamp. For replacement bulbs not listed here, contact your dealer. 5-52