2007 GMC Canyon Owner's Manual - Page 312

Taillamps, Turn Signal, Stoplamps and Back-up Lamps A. Stoplamp/Taillamp B. Turn Signal/Taillamp C. Back-up Lamp 2. Remove the two rear lamp assembly screws near the tailgate latch. 3. Pull the lamp assembly away from the vehicle. 4. Turn the bulb socket counterclockwise to remove it from the taillamp assembly. To replace one of these bulbs: 1. Open the tailgate. See Tailgate on page 2-10 for more information. 5. Holding the socket, pull the old bulb to release it from the socket. 6. Push the new bulb into the socket until it clicks. 7. Insert the bulb socket into the taillamp assembly and turn it clockwise to secure. 8. Reinstall the taillamp assembly and tighten the screws. 9. Close the tailgate. 5-52