2011 GMC Savana 2500 Cargo Owner's Manual - Page 305

Vehicle Care 4. To install the new wiper insert, slide the notched end last, into the end with two blade claws. Then slide the insert all the way through the blade claws at the opposite end. 5. Make sure that the notches are locked by the bottom claws. Make sure that all other claws are properly locked on both sides of the insert slot. 2. Press down on the blade assembly pivot locking tab. Pull down on the blade assembly to release it from the wiper arm hook. 3. The insert has two notches at one end that are locked by bottom claws of the blade assembly. At the notched end, pull the insert from the blade assembly. 6. Put the blade assembly pivot in the wiper arm hook. Pull it up until the pivot locking tab locks in the hook slot. 7. Carefully lower the wiper arm and blade assembly into the windshield. 10-39 Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑44. For any bulb‐changing procedure not listed in this section, contact your dealer. Halogen Bulbs { WARNING Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package.