1992 Honda Accord Owner's Manual - Page 49

Lights Turn Signals RIGHT TURN Push the turn signal lever down to signal a left turn, and up for a right turn. The indicator and appropriate FIRST signal lights will blink. The lever will STOP return automatically to its original position when the steering wheel is LEFT TURN returned to straight ahead. For lane changing, you can signal by pushing the lever part way up or down (to the first stop) and holding it there; the lever will return to its original position when you release it. If either turn signal indicator lights up but does not blink, blinks faster than usual or does not light up at all, check for a burned out bulb or fuse. Headlights Turn the light switch to the first position ( ) for taillights, side marker lights, position lights, license plate lights, and instrument panel lights. Turn to the second position ( ) to add the headlights. FIRST POSITION Turn SECOND POSITION If the driver's door is opened when the light switch is turned to either " o n " position, a chime will sound to remind you to turn off your lights. High Beam/Low Beam Switch The headlights may be switched between low beam and high beam by pulling the turn signal lever toward you. The blue high beam indicator light will be on when the high beam is on. Pull and release Headlight Flasher To flash the headlights, pull lightly on the turn signal lever and release. (cont'd)