1994 Honda Accord Owner's Manual - Page 173

Lights 2. Remove the socket from the light assembly by turning it one-quarter turn counterclockwise. 3. Pull the bulb straight out of the socket. 4. Install the new bulb in the socket. 5. Turn on the parking lights and check that the new bulb is working. 6. Reinstall the socket. Turn it clockwise until it locks. Replacing Bulbs in the Interior Courtesy Lights The courtesy lights in the doors and roof come apart the same way. They do not all use the same bulb. 1. Remove the lens by carefully prying on the edge of the lens with a fingernail file or a small flat-tip screwdriver. Do not pry on the edge of the housing around the lens. Door light: Not available on the U.S. DX model and Canadian LX model DOOR LIGHT 2. Remove the bulb by pulling it straight out of its metal tabs. 3. Push the new bulb into the metal tabs. Snap the lens back in place. pry on the top middle of the lens. Ceiling light: pry on the front edge of the lens in the middle. CONTINUED Maintenance