1995 Honda Prelude Owner's Manual - Page 140

Engine Oil OIL FILTER 4. Install a new oil filter according to instructions that come with it. 5. Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten it to: 40 N.m (4.0 kg-m , 29 Ib-ft) 6. Refill the engine with the recommended oil. Engine oil change capacity (including filter): (US: S, Canada: S) 3.8 l (4.0 US qt, 3.3 Imp qt) (US: Si, Canada: SR, SR 4WS) 4.3 l (4.5 US qt, 3.8 Imp qt) (US: VTEC, Canada: SR-V) 4.8 l (5.1 US qt, 4.2 Imp qt) 7. Replace the engine oil fill cap. Start the engine. The oil pressure indicator light should go out within five seconds. If it does not, turn off the engine and reinspect your work. 8. Let the engine run for several minutes and check the drain bolt and oil filter for leaks. 3. Remove the oil filter and let the remaining oil drain. A special wrench (available from your Honda dealer) is required to remove the filter. Maintenance