1997 Honda Odyssey Owner's Manual - Page 28
1997 Honda Odyssey Manual
Page 28 highlights
Child Safety Second Seat Installation: There are three attachment points available for the seven-passenger model, and two attachment points available for the six-passenger model. To use a tether-style child seat in the second seat, the third seat must be stored in the floor recess (see page 60). You will find a U-shaped slit in the carpeting at each attachment point. Select the attachment point you want to use, and pull up the carpeting at the slit. Attach the tether strap to the mounting hook and make sure it is secure. Important Safety Information Keep the third seat in the floor while using a tether-style child seat in the second seat. If you attempt to return the third seat to the upright position, you may damage the vehicle or tether, even though the damage may not be obvious. If this happens, the child seat may not be properly restrained in a crash. TOOTHED WASHER Third Seat Installation: There are two attachment points on the tailgate sill. Select the attachment point you want use, and remove the plug with a small flattipped screwdriver or a fingernail file. Install the tether hardware that came with the child seat. Tighten the bolt to: 16 lbf.ft (2.2 kgf.m , 22 N.m) If you are not sure how to install the hardware, have it installed by your authorized Honda dealer. The anchor plate and mounting hardware for a top tether are supplied with the car. When installing, make sure the toothed washer is on the bottom of the bolt. The supplied anchor plate is designed only for mounting a child restraint. Do not use it for any other purpose. Storing a Child Seat When you are not using an infant seat or other child restraint, either remove it or make sure it is properly secured so it cannot be thrown around the car during a crash. Driver and Passenger Safety