1998 Honda Prelude Owner's Manual - Page 40

Protecting Children Since a tether can provide additional security, we recommend using a tether whenever one is required or available. (Tethers are required in Canada. U.S. owners may check with the child seat maker to determine whether a tether is available for a particular child seat.) To attach a tether to your car: 1. Using the illustration on page 38 , locate the attachment point you want to use. 2. Remove the plug with a small flattipped screwdriver or a fingernail file. 3. Install the anchor plate and mounting hardware. The hardware is available for purchase from your Honda dealer (part number 82410-SE3-C01). For Canadian models, the hardware is supplied with the vehicle. To attach the tether to the child seat, follow the child seat maker's instructions. If you are not sure how to install the tether, or you need mounting hardware, contact your Honda dealer. When installing tether hardware, make sure the toothed washer is on the bottom of the bolt. Tighten the bolt to: 16 lbf.ft (22 N.m,2.2 kgf.m) If a torque wrench was not used, see your Honda dealer as soon as possible to verify proper installation. Driver and Passenger Safety