2001 Honda Civic Owner's Manual - Page 31

Protecting Children Installing a Child Seat After selecting a proper child seat, and a good position to install the seat, there are three main steps in installing the seat: 1. Properly secure the child seat to the car. All child seats are To provide security during normal driving maneuvers as well as during a collision, we recommend that parents secure a child seat as firmly as possible. However, a child seat does not need to be ''rock solid.'' In some vehicles or seating positions, it may be difficult to install a child seat so that it does not move at all. Some side-toside or back-and-forth movement can be expected and should not reduce the child seat's effectiveness. If the child seat is not secure, try installing it in a different seating position, or use a different style of child seat that can be firmly secured in the desired seating position. 3. Secure the child in the child seat. Make sure the child is properly strapped in the child seat according to the child seat maker's instructions. A child who is not properly secured in a child seat can be thrown out of the seat in a crash and be seriously injured. Storing a Child Seat designed to be secured to the car with the lap part of a lap/shoulder belt. Some child seats can be secured to the vehicle's lower anchorages instead. A child whose seat is not properly secured to the car can be endangered in a crash. See pages 31 , 35 and 42 for instructions on how to properly secure child seats in this car. 2. Make sure the child seat is firmly secured. After installing a child When you are not using a child seat, either remove it and store it in a safe place, or make sure it is properly secured. An unsecured child seat can be thrown around the car during a crash or sudden stop and injure someone. seat, push and pull the seat forward and from side to side to verify that it is secure. Driver and Passenger Safety 29