2002 Honda Accord Owner's Manual - Page 318

Changing a Flat Tire EXTENSION JACKING POINT WHEEL WRENCH 9. Locate the jacking point nearest the tire you need to change. It is pointed to by an arrow molded into the underside of the body. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 10.Use the extension and wheel wrench as shown to raise the vehicle until the flat tire is off the ground. U.S. DX, Value Package, and LX models: 11.Remove the wheel nuts and flat tire. Temporarily place the flat tire on the ground with the outside surface of the wheel facing up. Placing the wheel face down could mar its finish. Do not attempt to forcibly pry the wheel cover off with a screwdriver or other tool. The wheel cover cannot be removed without first removing the wheel nuts. CONTINUED Taking Care of the Unexpected 315