2003 Honda S2000 Owner's Manual - Page 197
2003 Honda S2000 Manual
Page 197 highlights
Lights Replacing Front Turn Signal and Side Marker Light Bulbs 1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the left. 2. Use a flat-tipped screwdriver to remove the three holding clips from the inner fender. 3. Pull the inner fender cover back. 4. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 5. Pull the bulb straight out of its socket. 6. Install the new bulb in the socket. 7. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 8. Test the lights to make sure the new bulb is working. 9. Put the inner fender cover in place. Install the three holding clips. Lock each clip in place by pushing on the center. 200 Maintenance