2008 Honda Civic Owner's Manual - Page 248
2008 Honda Civic Manual
Page 248 highlights
Main Menu Table Of Contents Lights 4. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Turn on the headlights to test the new bulb. 7. If you replaced a headlight bulb on the driver's side, reinstall the engine coolant reserve tank. Low Beam Headlight HOLDING CLIP BULB TAB 2. Remove the bulb by turning it onequarter turn counterclockwise. 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 1. To change the bulb on the driver's side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger's side, turn the steering wheel to the left. 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. CONTINUED Maintenance 245 2008 Civic Sedan