2008 Honda Element Owner's Manual - Page 108

Main Menu Table Of Contents Vents, Heating, and A/C Air flows from the defroster vents at the base of the windshield. When you select or , the system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on. Ventilation (fresh air mode) The flow-through ventilation system draws in outside air, circulates it through the interior, then discharges it through vents near the tailgate. 1. Set the temperature to the lower limit. 2. Make sure the A/C is off. and fresh air mode. 3. Select 4. Set the fan to the desired speed. Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. and fresh air mode. 1. Select 2. Set the fan to the desired speed. 3. Adjust the warmth of the air with the temperature control dial. Using the A/C Air conditioning places an extra load on the engine. Watch the engine coolant temperature gauge (see page 68 ). If it moves near the red zone, turn off the A/C until the gauge reading returns to normal. 1. Turn on the A/C by pressing the button. The indicator in the button comes on when a fan speed is selected. 2. Set the temperature to the lower limit. . 3. Select 4. If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode. 5. Set the fan to the desired speed. If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning on the A/C, and setting the fan to maximum speed in fresh air mode. To cool the interior with MAX A/C: 1. Set the mode control dial to MAX A/C. The system automatically turns on the A/C, selects and switches to recirculation mode. 2. Set the temperature to the lower limit. 3. Set the fan to the desired speed. 104 2008 Element