2009 Honda Element Owner's Manual - Page 268

Main Menu Table Of Contents Lights Replacing a Side Turn Signal Bulb WHEEL ARCH PROTECTOR CLIP SCREWS 1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the right. 2. Use a Phillips-head screwdriver to remove the three holding screws, and remove the wheel arch protector from the inner fender. 3. Use a flat-tipped screwdriver to remove the holding clip from the inner fender. 4. Pull the inner fender cover away from the fender. 5. Remove the socket from the turn signal assembly by turning it onequarter turn counterclockwise. 6. Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 7. Insert the socket back into the turn signal assembly. Turn it clockwise to lock it in place. 8. Turn on the lights to make sure the new bulb is working. 264 2009 Element