2009 Honda Ridgeline Owner's Manual - Page 344
2009 Honda Ridgeline Manual
Page 344 highlights
Main Menu Table Of Contents Lights 5. Install the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the lights to test the new bulb. 8. Reinstall the inner fender. Make sure it is installed under the edge of the front bumper. 1. Drop open the tailgate. 9. Reinstall the holding clip, and push in its head, then install the bolts and tighten them securely. 2. Remove the two bolts, and remove the rear light assembly from the rear pillar. 3. Determine which of the three bulbs is burned out: brake/ taillight, turn signal/hazard light, or back-up light. BULB SOCKET Replacing Rear Bulbs 4. Remove the socket by turning it one-quarter turn counterclockwise. 5. Remove the burned-out bulb by pulling it straight out of the socket. 340 2009 Ridgeline