2011 Honda Insight Owner's Manual - Page 382
2011 Honda Insight Manual
Page 382 highlights
Lights Replacing a Front Parking Light Bulb HOLDING CLIP BULB 4. Install the socket back into the headlight assembly. Turn it clockwise to lock it in place. 5. Turn on the lights to make sure the new bulb is working. (Right side) 6. Install the upper part of the windshield washer reservoir tank in the reverse order of removal. SOCKET 1. Open the hood. To change the bulb on the right side, remove the upper part of the windshield washer reservoir tank. Use a flat-tip screwdriver to remove the holding clip, then remove the upper part by pulling it straight up. 2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 376