2012 Honda CR-V Owner's Manual - Page 311
2012 Honda CR-V Manual
Page 311 highlights
Replacing Light Bulbs Headlight Bulbs When replacing, use the following bulbs. High/Low beam headlight: 60/55W (H4/HB2) 1 Headlight Bulbs NOTICE ■ High/Low Beam Headlight Rubber Weather Seal 1. Remove the coupler. 2. Remove the rubber weather seal. Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area or tow a trailer, have the aiming readjusted at a dealer or by a qualified technician. The H4/HB2 type is halogen bulb. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. The exterior lights' inside lenses (headlights, brake lamps, etc.) may fog temporarily after a vehicle wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer. Coupler Hold-down Wire 3. Remove the hold-down wire, then remove the bulb. 4. Insert a new bulb. Maintenance Bulb Continued 309