2014 Honda Civic 2014 Civic Sedan Owner's Manual (4-door) - Page 423

uu If a Tire Goes Flat u Temporarily Repairing a Flat Tire Sealant/Air Hose 10. Unplug the power plug from the accessory power socket. 11. Unscrew the sealant/air hose from the tire valve stem. Reinstall the valve cap. 12. Press the pressure relief button until the gauge returns 0 psi (0 kPa). 1 Injecting Sealant and Air See a Honda dealer for a replacement sealant bottle and proper disposal of an empty bottle. Valve Stem Repair Notification Label Handling the Unexpected 13. Apply the repair notification label to the flat surface of the wheel. u The wheel surface must be clean to ensure the label adheres properly. ■ Distributing the Sealant in the Tire 1. Apply the speed restriction label to the location as shown. 2. Drive the vehicle for about 10 minutes. u Do not exceed 50 mph (80 km/h). 3. Stop the vehicle in a safe place. 1 Distributing the Sealant in the Tire Stop and recheck the air pressure after every 10 minutes of driving as necessary until you reach the nearest service station where you should have the tire permanently repaired or replaced. Speed Restriction Label 422