2004 Hummer H2 Owner's Manual - Page 367

4. Unplug the electrical connector. Front Turn Signal and Parking Lamps 1. Open the hood as described earlier under Hood Release on page 5-10 and locate the affected lamp. 2. Turn the bulb socket counterclockwise and remove it from the lamp housing. 5. Push the new bulb/socket into the headlamp assembly making sure to align the splines on the bulb/socket with the splines in the headlamp housing. Use care not to touch the bulb with your fingers or hands. 6. Turn the bulb/socket retainer clockwise to lock the bulb/socket in place. 7. Plug in the electrical connector. 3. Pull the bulb from the bulb socket. 4. Put the new bulb into the bulb socket. 5. Put the bulb socket into the lamp housing and turn it clockwise until it locks. 5-53