2006 Infiniti QX56 Owner's Manual - Page 335

4. Read the tire pressure on the gauge stem and compare to the specification shown on the Tire and Loading Information label. 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. LDI0430 Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. 7. Check the pressure of all other tires, including the spare. Size Cold Tire Inflation Pressure WDI0394 TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. Front Original Tire: P265/70R18 240 kPa, 35 PSI Rear Original Tire: P265/70R18 240 kPa, 35 PSI Spare Tire: P265/70R18 240 kPa, 35 PSI Maintenance and do-it-yourself 8-33