2007 Jeep Wrangler Owner Manual - Page 210

210 UNDERSTANDING YOUR INSTRUMENT PANEL 30. Electronic Throttle Control (ETC) Warning Light - If Equipped This light informs you of a problem with the Electronic Throttle Control System. If a problem is detected while the engine is running, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when the vehicle is safely and completely stopped and the gear selector is placed in the P (Park) position. The light should turn off. If the light remains on with the engine running, your vehicle will usually be drivable, however, see your dealer for service as soon as possible. If the light continues to flash when the engine is running, immediate service is required and you may experience reduced performance, an elevated / rough idle, or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned on and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer. 31. Compass/Mini-Trip Computer Display - If Equipped When the appropriate conditions exist, this display shows the Mini-Trip Computer messages. Refer to "MiniTrip Computer" later in this section. 32. Compass/Mini-Trip Computer Button-If Equipped Press this button to switch between the different functions.