2007 Jeep Wrangler Owner's Manual - Page 197
2007 Jeep Wrangler Manual
Page 197 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 197 engine running, a malfunction has been detected in either the ESP or the BAS system. If this light stays illuminated, have the ESP and BAS checked at your authorized dealer as soon as possible. Refer to "Electronic Brake Control System" in Section 5 for more information. 30. Electronic Throttle Control (ETC) Warning Light - If Equipped This light informs you of a problem with the Electronic Throttle Control System. If a problem is detected while the engine is running, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when the vehicle is safely and completely stopped and the gear selector is placed in the P (Park) position. The light should turn off. If the light remains on with the engine running, your vehicle will usually be drivable, however, see your dealer for service as soon as possible. If the light continues to flash when the engine is running, immediate service is required and you may experience reduced performance, an elevated / rough idle, or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned on and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer. 31. Compass/Mini-Trip Computer Display - If Equipped When the appropriate conditions exist, this display shows the Mini-Trip Computer messages. Refer to "MiniTrip Computer" later in this section. 32. Compass/Mini-Trip Computer Button-If Equipped Press this button to switch between the different functions. 4