2010 Jeep Grand Cherokee Owner's Manual - Page 45

44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE BeltAlert will be reactivated if the driver's seat belt is 3. Within 60 seconds of starting the vehicle, unbuckle unbuckled for more than 10 seconds and the vehicle and then re-buckle the driver's seat belt at least three speed is greater than 5 mph (8 km/h). times within 10 seconds, ending with the seat belt buckled. BeltAlert can be enabled or disabled by your authorized dealer or by following these steps: 4. Turn the ignition key to the OFF position. A single chime will sound to signify that you have successfully NOTE: The following steps must occur within the first completed the programming. 60 seconds of the ignition switch being turned to the ON or START position. Chrysler Group LLC does not recom- BeltAlert can be reactivated by repeating this procedure. mend deactivating BeltAlert . NOTE: Although BeltAlert has been deactivated, the 1. Turn the ignition switch to the OFF position, and Seat Belt Reminder Light will continue to illuminate buckle the driver's seat belt. while the driver's seat belt remains unfastened. 2. Turn the ignition key to the ACC/ON position (do not start the engine), and wait for the Seat Belt Reminder Light to turn off.