2012 Jeep Grand Cherokee Owner Manual SRT - Page 562

560 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, And Backup Lamps 1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 4. Twist socket counter clockwise and remove from lamp. 5. Pull the bulb to remove it from the socket. 6. Replace the bulb, reinstall the socket, and reattach the lamp assembly. Rear Liftgate Mounted Tail Lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pull up glass seal at bottom of window opening. 3. Grasp the tail lamp and pull firmly rearward to 6. Remove small trim panel around liftgate glass striker. disengage the lamp from the aperture panel. 7. Close flipper glass and raise the liftgate.