2014 Jeep Patriot Owner Manual - Page 452

450 WHAT TO DO IN EMERGENCIES 4. Remove the cap from the valve stem and then screw NOTE: Sealant may leak out through the puncture in the the fitting at the end of the Sealant Hose (6) onto the tire. valve stem. If the sealant (white fluid) does not flow within 0 - 10 5. Uncoil the Power Plug (8) and insert the plug into the seconds through the Sealant Hose (6): vehicle's 12 Volt power outlet. 1. Press the Power Button (4) to turn Off the TIREFIT kit. NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire. (C) Injecting TIREFIT Sealant Into The Deflated Tire: • Always start the engine before turning ON the TIREFIT kit. NOTE: Manual transmission vehicles must have the parking brake engaged and the shift lever in NEUTRAL. Disconnect the Sealant Hose (6) from the valve stem. Make sure the valve stem is free of debris. Reconnect the Sealant Hose (6) to the valve stem. Check that the Mode Select Knob (5) is in the Sealant Mode position and not Air Mode. Press the Power Button (4) to turn On the TIREFIT kit. 2. Connect the Power Plug (8) to a different 12 Volt power outlet in your vehicle or another vehicle, if available. Make sure the engine is running before turning ON the TIREFIT kit. • After pressing the Power Button (4), the sealant (white fluid) will flow from the Sealant Bottle (1) through the 3. The Sealant Bottle (1) may be empty due to previous use. Call for assistance. Sealant Hose (6) and into the tire.