2012 Kawasaki NINJA ZX-14R Owners Manual - Page 44

42 GENERAL INFORMATION Engage / Shift Up Indicator Light Lighting Mode - "ENGAGE LAMP", "SHIFT LAMP", "LAMP MODE" The engage/shift up indicator lighting mode has 3 modes: light on (bright), light on (dim), and blinking. The engage/shift up indicator light can be used in closed course competition. Do not use the engage/shift up indicator light during everyday riding. Engage Indicator Light The engage indicator light is used to indicate the preferred timing for clutch engagement under the following conditions: transmission is in 1st gear; the clutch lever is pulled in; and the vehicle speed is less than 5 km (3 mph). To adjust the engage indicator light engine speed setting in the tachometer, do the following while the engine is stopped. the upper/lower button to se• Push lect the "ENGAGE LAMP" after set- • • • • • ting language in the Language Setting Menu. To adjust the engage indicator light engine speed, align the cursor to "ENGAGE LAMP" by pushing the "SEL" button. The previous engage indicator light setting starts to blink. Push the upper/lower button to adjust the engage indicator light engine speed setting. The engine speed timing advances in 100 r/min (rpm) increments up to its maximum setting. Select the OFF mode to disable the engage indicator light function when it is not required. The adjustment range for this function is between 1 200 ∼ 6 000 r/min (rpm). Once the maximum engine speed setting for the engage indicator light