2013 Kawasaki MULE 4010 Trans4x4 Realtree APG HD Owners Manual - Page 77
2013 Kawasaki MULE 4010 Trans4x4 Realtree APG HD Manual
Page 77 highlights
SAFE OPERATION 75 Driving in Reverse Start the engine following the procedure in the "Starting the Engine" section. Before shifting into reverse, stop the vehicle completely. Refer to the Gear Shift Lever in the "Shift Levers" section and "Reversing Gears" section. Turn around and look behind you before backing up to be sure there are no obstacles or people in your way. Gradually open the throttle and begin backing up cautiously. To stop while driving in reverse, close the throttle and gradually apply the brake. Avoid sudden application of the brake. Driving in "4WD" "4WD" gives greater traction when you are climbing steep inclines, or driving on bumpy, sandy or snowy surfaces. It also helps break loose, with the differential locked under certain circumstances, for example, when the vehicle is stuck in the mud. If maximum torque is needed in these situations, shift into the low position with the shift lever. Refer to the "Shift Levers" section and "2WD-4WD Shifting" "Shifting the Differential," and "Hi-Lo Shifting" sections. j NOTE NOTICE Do not operate the gear shift lever to change gears while driving the vehicle in reverse, or the transmission may be damaged. Remember: Look behind you before backing up. Open the throttle gradually. To stop, gradually apply the brake. żDo not drive in "4WD" on paved surfaces, because it increases tire and drive train wear and makes the steering feel tight. • • • "4WD" on steep inclines or loose surfaces, or • Use when stuck in the mud, with the differential locked maximum torque shift into low range. • For • Do not drive in "4WD" on paved surfaces. if necessary. Remember: